Japan Radio Co. JMR-611 Instruction Manual Download Page 111

Page: 111 / 188

3.10 AIS FUNCTION

3-57

࠙

SOG

ࠚ

The received SOG(speed over ground) is displayed with up to 1 decimal place. If
there is no valid value, "Missing" is displayed.

࠙

HDG

ࠚ

The received true heading is displayed. If there is no valid value, "Missing" is
displayed.

࠙

ROT

ࠚ

The received rate of turn is displayed with up to 1 decimal place. If there is no valid
value, "Missing" is displayed.

࠙

Blue Sign

ࠚ

The received blue sign information is displayed. If there is no valid value, "Missing"
is displayed.

࠙

Alarms

ࠚ

The received alarm is displayed.

ID :

Alarm ID Number

Description : Description text of alarm
Time :

Time of alarm condition change, UTC

[Voyage]

Display blue corn, cargo loading, arrival request time and water level.

࠙

Number of Blue Cones

ࠚ

The received information of hazardous cargo is displayed. If there is no valid value,
"Missing" is displayed.

࠙

Loaded/Unloaded

ࠚ

The received information of loaded cargo is displayed. If there is no valid value,
"Missing" is displayed.

Summary of Contents for JMR-611





























































































































































































Search results

Summary of Contents for JMR-611

Reviews:

Related manuals for JMR-611

Brands by name

Popular brands

Japan Radio Co. JMR-611, Instruction Manual

Search results

Summary of Contents for JMR-611

Reviews:

Related manuals for JMR-611

Brands by name

Popular brands