Conditions of warranty
An Advanced Foot Switch manufactured by JL Marine Systems Inc., is warranted against defects in
material and workmanship to the original owner according to the following stipulations.
1. Advanced Foot Switch warranty is activated on the date of purchase by JL Marine Systems, Inc.
You may also register your Advanced Foot Switch on our web site or send in the registration
card. Please retain your sales receipt as proof of purchase.
2. Install Genuine Power-Pole Merchandise ONLY. This warranty is void if any non authorized parts
are used or installed.
3. This warranty is void if the Power-Pole Advanced Foot Switch is used commercially structurally
altered or subject to stress beyond the physical limits of the manufactured material. This
Warranty is void if the Advanced Foot Switch is exposed to excessive water or submersion.
1. Parts which prove defective within (90) days from the date of purchase, JL Marine Systems,
Inc. will pay for the replacement product shipping and handling fees to
and from the JL Marine Systems, Inc. manufacturing plant or some other place which
JL Marine Systems, Inc. might designate. Warranty shipping procedures only apply
in the continental USA.
2. Parts which prove defective after (90) days but before (24) months from the date of
purchase will also be repaired or replaced free of charge, but there may be a shipping
charge to JL Marine Systems, Inc. manufacturing plant or some other place which
JL Marine Systems, Inc. might designate. Warranty shipping procedures only apply
in the continental USA.
THE WARRANTY CONTAINED HEREIN IS THE EXCLUSIVE WARRANTY MADE BY JL Marine
Systems, Inc. AND THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR OF MERCHANTABILITY MADE
WITH RESPECT TO SUCH ANCHORS. JL Marine Systems, Inc. IS NOT LIABLE FOR ANY INJURY
OR MISHAPS SUSTAINED IN THE USE OF THIS PRODUCT. THE USER OF THIS PRODUCT
ACKNOWLEDGES ASSUMED RISKS AND WAIVES ANY AND ALL CLAIMS AGAINST JL Marine
Systems, Inc. AND ANY OF IT’S AGENTS.
This warranty applies under conditions of normal use. The warranty does not cover:
1) defects caused by improper assembly or disassembly; 2) defects occurring after purchase due
to product modification, intentional damage, accident, misuse, abuse, negligence or exposure to
corrosive elements; 3) cosmetic damage and 4) labor or assembly costs.
Except as provided herein, JL Marine Systems, Inc. makes no express warranties, and any implied
warranty, including without limitation any implied warranty of merchantability or fitness for a particular
purpose, is limited in its duration to the duration of the written limited warranty set forth herein.
Except as provided herein, JL Marine Systems, Inc. shall have no liability or responsibility to the
purchaser or any other person or entity with respect to any liability, loss or damage caused or
alleged to be caused directly or indirectly by use of the product, including, but not limited to, any
incidental or consequential damages. Some states do not allow limitation on how long an implied
warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above
limitation and exclusion may not apply to you. This warranty gives you specific legal rights. You may
also have other rights which vary from state to state.
Two (2) year warranty
PLACE
POST CARD
POSTAGE HERE
Post office will not
deliver without
proper postage.
9208 Palm River Road
Suite 303
Tampa, FL 33619
___________________________________
___________________________________
___________________________________
Operating Instructions
Using Speed Control
1. The foot switch has three speed settings (slow, medium, & fast).
Depressing and releasing the “speed” button on the foot switch will
toggle through the three settings. (See Figure 1)
2. The LED on the foot switch will flash at a speed corresponding to either a
slow, medium, or fast setting.
Dual Power-Pole Operation
1. With dual Power-Pole shallow water anchors installed, the foot switch can
also be used to toggle between independent or simultaneous control of
the anchors. Depressing and releasing the “directional” button on the
foot switch will toggle through the three settings (port side only, starboard
side only, or simultaneous control).
(See Figure 2, 3, 4 and 5)
2. The LED will flash either port side only, starboard side only, or on both
sides to indicate the current control settings
3. To raise or lower the Power-Pole shallow water anchor, press and hold
either the “up” or “down” button on the foot switch. The anchor will only
continue to move so long as you keep the button depressed.
4.
Auto Mode:
Double tapping (depressing and releasing 2 times within 1
second) either the “up” or the “down” button on the foot switch will cause
the anchor to retract or deploy automatically. The Power-Pole anchor will
continue to move in said direction until it either retracts completely or
senses the bottom.
Sleep Mode:
Press both buttons for 3 seconds, LED lights will flash indicating
the Foot Switch is now in Sleep Mode. To reactivate, press both buttons
again for 3 seconds until LED lights flash.
Figure 1
Figure 2
Figure 4
Figure 3
Figure 5
