![background image](http://html1.mh-extra.com/html/iveco/daily-m-y-2012/daily-m-y-2012_body-builder-instructions_2097239034.webp)
2-8
CHASSIS MODIFICATIONS
D
AILY
Base — 02/2012
Printed 603.95.241
Drills on the chassis
Drills on the chassis
2.2
Drills on the chassis
When it is necessary to fit auxiliary parts or assemblies to the chassis, the existing holes made in the factory should be used if
possible.
!
Drilling the flanges of the vehicle side members is strictly prohibited, with the exception of what is
indicated in paragraph 3.3.1.
In special cases (application of brackets, angle irons, etc.) where new holes have to be drilled, these holes shall be made on the vertical
rib of the side member and shall be accurately burred and bored.
2.2.1
Hole positioning and dimensions
The new holes shall not be drilled in the areas subjected to greater stress (e.g. spring supports) and areas where the side member
section changes.
The diameter of the holes should be suitable for the thickness of the panel and must not exceed 13 mm (unless otherwise specified).
The distance of the hole axis from the edges of the side member must not be less than 30 mm, and the axes of the holes must not
be between them, or less than 30 mm with respect to the existing ones.
The holes must be offset, as shown in the Figure 2.2.
The original drilling diagrams must be followed when moving spring supports or cross members.
Figure 2.2
102420
Summary of Contents for DAILY M.Y. 2012
