Iveco DAILY M.Y. 2012, Body Builder Instructions

Page: 172 / 252

5-18
SPECIAL INSTRUCTIONS FOR ELECTRONIC SUBSYSTEMS D
AILY
Base - 02/2012 Printed 603.95.241
Electronic control units
Warnings
Vehicles are equipped with sophisticated electrical/electronic systems that control their operation (e.g. ABS, EDC, etc.).
Before installing additional heaters, Power Take Offs, speed limiters, anti-theft devices, mobile phones and cooling system
compressors that could interact with the above electronic systems, it is advisable to check the feasibility of application with IVECO.
It is also necessary for appropriate diagnostic checks to be carried out in order to confirm that the system has been correctly set up.
For more detailed information on the vehicle electrical system, refer to the specific Workshop Manuals.
Operations on the electrical system (e.g. removal of cables, addition of circuits, replacement of
equipment or fuses, etc) carried out in a manner not compliant with IVECO’s instructions or carried
out by unqualified staff may cause serious damage to the on-board systems, affecting safety and
reliability.
!
Operations carried out on the electrical system in a non-compliant manner may cause significant
damage (e.g. short-circuits with the possibility of fire and destruction of the vehicle) and authorise
IVECO to declare the contractual warranty forfeit.
!
It is absolutely prohibited to make changes to or connections to the CAN lines, which should be
considered inviolable. Any diagnosis and maintenance operations must be carried out exclusively by
authorised staff using equipment approved by IVECO.
!
Written authorisation from IVECO is required for any exemption from the assembly guidelines.
Failure to comply with the above prescriptions will cause the warranty to become null and void.
NOTE