Iveco DAILY M.Y. 2012, Body Builder Instructions

Page: 54 / 252

2-28
CHASSIS MODIFICATIONS D
AILY
Base — 02/2012 Printed 603.95.241
Application of the towing hook
Remarks concerning the useful load
It is necessary to check that the static load on the hook does not cause the permitted load on the axle and on the rear axles
of the vehicle to be exceeded and that the minimum weight on the front axle is observed, as indicated in point 1.15.3.
Increase in the towable weight
For vehicles suited for the IVECO tow, it is possible to assess, in certain cases and for particular uses, the possibility to authorise
towable weights that exceed what is normally permitted.
These authorisations contain the conditions for towing and, if necessary, provides information regarding the changes and operations
to be implemented on the vehicle: reinforcements to the standard cross member (see Figure 2.12), or assembly of a reinforced cross
member when available, or adjustments to the braking system.
The tow hook must be suitable for the new use and its attachment flange must coincide with that of the cross member.
To fasten the cross member to the frame, use flanged head nuts and screws or hexagonal head screws with a minimum class of
8.8.
Use loosening prevention systems.
Plates
In some countries, standards require a plate to be positioned near the tow device that specifies the maximum towable weight
the maximum vertical load permitted.
If not already present, the fitter must implement and position one.