Iveco DAILY M.Y. 2012, Body Builder Instructions, Page: 205 / 252

SPECIAL INSTRUCTIONS FOR ELECTRONIC SUBSYSTEMS
5-51
D
AILY
Printed 603.95.241 Base - 02/2012
Electrical system: modifications and drawing-off power
5.4.7 Harness modifications due to changes to wheelbase or overhang
If cable length on the frame is altered due to a new wheelbase and overhang, a watertight junction box must be used which
has the same characteristics as those used on the standard vehicle. The components used such as wires, connectors, terminal blocks,
conduits etc. must be of the same type as those used originally and be correctly fitted.
As far as electronic control device function is concerned, no joins are permitted: the cable must be rep laced by a new cable with
the same specifications as that used on the vehicle, and of appropriate length.
5.4.8 Provision for trailer
If the tail-lights are repeated on the trailer, fit the vehicle with a 13-pin trailer point.
It is not permitted to connect directly to the original equipment tail-light lights. Connection to the original vehicle tail-lights could
cause current overloads that will be indicated by the on-board computer as operating faults.
If it is necessary to make changes to the system other than those described in this manual (e.g. inclusion of LED lights), the operation
must be carried out in conjunction with Iveco.
a) Trailer connector added by the Bodybuilder
If the vehicle is not ordered with a trailer point, a set may be ordered from parts. This consists of:
- electronic control unit;
- ECU mounting bracket with guard;
- chassis cable with provision for trailer;
- rear bridle for trailer socket.
Installation
For correct installation it is necessary to:
- mount the ECU on the bracket; also fit the guard on the cab;
- fit the bracket unit and the ECU on the chassis, as shown in figg. 5.40 - 5.41;
- replace the chassis cable with the new one provided for the trailer socket - fig. 5.43;
- fit the connecting bridle for the 13 pin socket according to the type of hook (high or low) - fig. 5.42.
Figure 5.40
VAN - Rear View
162239
CAB - Rear View
162240
Figure 5.41