Iveco DAILY M.Y. 2012, Body Builder Instructions

Page: 218 / 252

A-6
APPENDIX A - DAILY PASSENGER TRANSPORT D
AILY
Base - 02/2012 Printed 603.95.241
Building the bodywork
A.3.5 Seat supporting structures, and their fixing
Changing the seat positioning or creating special solutions (e.g. wheelchair transport) is possible subject to IVECO authorisation.
Direct anchoring of seats to the floor or the wheel arches is not permitted and as such a specific structure (framework) must be
provided for to distribute the load across the whole floor surface.
Since the anchoring of the seats to the framework is of primary importance for safety, adopting
IVECO original solutions immediately ensures relevant regulations are complied with.
Other solutions, on the other hand, shall remain the full responsibility of the Bodybuilder, including
the execution of (destructive) testing. NOTE
On standard production vehicles the framework is made from zinc plated sheet (thickness: 2 mm) and with transversal plates
(thickness: 3 mm) for housing the fasteners.
The following figures illustrate some details of the structures and the methods for fastening fixed and rail-mounted seats, extracted
from IVECO drawings no. 504156623, 504208108 and 504208109.
The complete drawings can be requested at www.thbiveco.com .
Figure A.1
Floor frame for fixing seats
173264