Iveco DAILY M.Y. 2012, Body Builder Instructions

Page: 163 / 252

SPECIAL INSTRUCTIONS FOR ELECTRONIC SUBSYSTEMS
5-9
D
AILY
Printed 603.95.241 Base - 02/2012
Bodybuilder connectors
Table 5.4 - Basic functions of 12 pin connector
Pin Description Signal Remarks
1 Speed limiter
Input
max. 10 mA
When an earth signal is supplied, vehicle speed is
limited to 30 km/h
Earth = active speed limitation
2
Programmable speed
limiter Input
max. 10 mA
When earth is connected, limitation is
activated/deactivated at the current speed
Earth = speed limitation activated/deactivated
3 Multiple switch Available for Power Take Offs
4 Speed signal (B7) See Specification 1
5 Key ON-repeat
Input
max 500 mA
Positive signal supplied to simulate initial key
rotation (key ON position) Only the main loads
are powered, the vehicle cannot be started from
outside because key recognition absent:
+12 V = key active
Open circuit = Key inactive
6 Power Take Off activation
Output
max 500 mA
When the Power Take Off is engaged, an earth
signal is present
Earth = Power Take Off engaged
Open circuit = Power Take Off disengaged.
7 Horn
Output
max 150 mA
Additional horns (to interface with relay)
Earth = horn active
Open circuit = horn not active
8 Multiple switch Available for Power Take Off
s
9
10 Engine revs (r.p.m.) See Specification 2
11 Not connected
12 Not connected