Iveco DAILY M.Y. 2012, Body Builder Instructions, Page: 39 / 252

CHASSIS MODIFICATIONS
2-13
D
AILY
Printed 603.95.241 Base — 02/2012
Rust protection and paint
Rust protection and paint
2.3 Rust protection and paint
All components assembled on the chassis must be painted according to IVECO Standard 18-1600
colour IC444 RAL 7021 70/80 gloss. NOTE
2.3.1 Original vehicle components
Table 2.5 shows the protection and painting classes required for the original vehicle components; Table 2.6 shows the classes
for non painted or aluminium parts and Table 2.7 shows the parts for the painted classes.
Table 2.5 - Class of protection - IVECO Standard 18 - 1600 (Table I)
Class Part requirements Examples of involved parts
A Parts in direct contact with atmospheric agents.
Body - Rear-view mirrors - Windscreen wipers - Sun visor
metal structure - Metal bumper - Cab hook-up lock -
Door stop device - Body fixing elements (screws, bolts,
nuts, washers), etc.
B
B2
Parts in direct contact with atmospheric agents with
mainly structural characteristics, in direct view.
Chassis and relative parts, including fastening elements.
Parts under the grille (class B).
Running boards outside the cab.
B1 Only for rear and front axles
C
Parts in direct contact with atmospheric agents, not in
direct view.
Engine and relative parts
D Parts not in direct contact with atmospheric agents.
Pedal assemblies - Seat frames - Fastening elements - etc.,
installed inside the cab.
The parts must be supplied only with cataphoresis or a rust inhibitor (Table III). The enamel will be
applied during the chassis finishing phase. NOTE