Iveco DAILY M.Y. 2012, Body Builder Instructions

Page: 17 / 252

GENERAL SPECIFICATIONS
1-9
D
AILY
Printed 603.95.241 Base - 02/2012
Vehicles identification
Vehicles identification
1.13 Vehicles identification
The commercial designation of IVECO vehicles is not the same as the type approval (homologation) designation. Two types
of commercial designation are shown below with the meaning of the codes used:
GVW
(t x 10)
Class Engine
rating
(HP : 10)
Version Suspension
2 9 L 1 0
3 5 S 1 2 D - P
5 0 C 1 5 C N G - P
Class Rear wheels GVW (t) Version
L single 2.8 — 3.3 - Truck
S single 3.5 D Crewcab 6+1
C twin 3.5 — 7.0 V Van
C Combi
CV City Version
Suspension SV Semi-Windowed Van
- mechanic CA Cab without rear wall
/P pneumatic CC Chassis
CCS Lightened chassis
A Automatic
CNG CNG engine
1.14 Trademarks and logos
Factory branding, marks and names must not be altered or removed from their original positions, since the originality of the
vehicle’s image must be protected.
Application of branding for the conversion or outfitting must be authorised. If present, they may not be placed immediately next
to IVECO branding.
IVECO reserves the right to withdraw branding and markings whenever the outfitting or transformation should bear characteristics
which do not conform with those required; the Bodybuilder shall take full responsibility for the vehicle in this case.
Instruction for added assemblies
The Bodybuilder must provide necessary instructions for servicing and maintenance of additional installed
components/assemblies upon delivery of the vehicle.
All units making up a single order must be equipped with components of the same brand, model and quality.