Iveco DAILY M.Y. 2012, Body Builder Instructions, Page: 170 / 252

5-16
SPECIAL INSTRUCTIONS FOR ELECTRONIC SUBSYSTEMS D
AILY
Base - 02/2012 Printed 603.95.241
Bodybuilder connectors
5.2.3 Antitheft system
In combination with central closing, the vehicle can be equipped with a perimeter type anti-theft system controlled from the
Body Computer.
This system consists of:
- a key with remote control, buttons for remote locking/unlocking;
- actuators to close the cab doors, the sliding side doors and the rear doors in the case of a van;
- perimeter door open sensors and bonnet open sensor (Figure 5.12);
- alarm siren (12 V) (Figure 5.13).
Current absorption of the antitheft device is 30-40 mA.
The Bodybuilder must provide a ”door closed” signal so that the anti-theft system can also monitor any break-in attempt on the
bonnet.
Engine bonnet button connecting diagram
(2)
(2)
Only for Stripped Camper, Chassis cowl and Stripped Chassis Cowl version with opt 5865
Pin1: Closed door Signal
Pin2: Closed door Signal
Open circuit
→
when door is closed
Closed circuit
→
when door is opened
Engine bonnet
plug
Figure 5.12
Engine Bonnet Opening sensor
162231 162232
Alarm Siren
Engine compartment
output
Figure 5.13
For the method of use, refer to the Use and Maintenance handbook.