Iveco DAILY M.Y. 2012, Body Builder Instructions

Page: 221 / 252

APPENDIX A - DAILY PASSENGER TRANSPORT
A-9
D
AILY
Printed 603.95.241 Base - 02/2012
Building the bodywork
A.3.6 Rear baggage compartment
The baggage compartment volume depends on the maximum weight technically permissible for the vehicle and its axles; the
size and position must be validated by structural tests and calculations.
A.3.7 Side access door
Creation of the door frame must guarantee that the structure in the area of the frame itself be non-deformable.
Only the upper or lower sections of door compartments in the original body shell may be modified,
but not both. NOTE
European Directive 2001/85/EC or ECE107 must also be respected with regard to the access bay and steps.
Figure A.4
162233
A.3.8 Inserted structures and handrail fixing
The handrails must be installed in such a way as not to entail risks of injury for passengers, their surface must be in a contrasting
colour with a non-slip finish. Construction and application on the vehicle must respect European Directive 2001/85/EC or ECE107.
The zones where the handrails are anchored to the original vehicle structure must be properly reinforced.
A.3.9 Fixing the disabled persons ramp and lift to assemble the wheelchair area
For the transport of wheelchair users, the access door must be equipped with a ramp and lift; a reserved space with specific
dimension must also be provided inside the vehicle. In any case European Directive 2001/85/EC or ECE107 must be respected.
Where the rear door is used, it is necessary to refer to the methods for fixing the tail lift described in section 3.9.