Iveco DAILY M.Y. 2012, Body Builder Instructions, Page: 194 / 252

5-40
SPECIAL INSTRUCTIONS FOR ELECTRONIC SUBSYSTEMS D
AILY
Base - 02/2012 Printed 603.95.241
Electrical system: modifications and drawing-off power
Precautions
In general it is wise to:
- where necessary use appropriate fuses that can be fitted near the tap;
- protect the added cables in special sheaths or corrugation, installing them in compliance with point 5.4.6.
And in fitting the CBA it is necessary to:
- avoid removing fuses from their position;
- insert the terminals into the studs and secure them using the special nuts (M5 flanged nut, self-locking, etc.) tightened to torque
(4
÷
6 Nm);
- then fix the CFO control unit (optional fuse control unit) to the CBA control unit, as in Figure 5.34, fitting the hole of the strip
on the stud bolt of the battery terminal (no. 6, incorporated in the CBA of Figure 5.33) and tightening the special nut to the
required torque (8.8
÷
13.2 Nm).
Figure 5.34
162237
BATTERY
BATTERY
Table 5.9
CFO Power Protection
Presence
Capacity Type
EURO5
4x2
EUROV
4x2
BIFUEL
S OPT
F74 30 Bodybuilder socket 1 X 50 C0 X X X
F76 30 Bodybuilder socket 1 X 50 C0 X X X