Iveco DAILY M.Y. 2012, Body Builder Instructions

Page: 53 / 252

CHASSIS MODIFICATIONS
2-27
D
AILY
Printed 603.95.241 Base — 02/2012
Application of the towing hook
2.6.5 Rear cross member in a lowered position
When it is necessary for the tow hook to have a lower position than what is originally foreseen, IVECO can release authorisation
to lower the attachment of the original cross member or to apply a supplementary cross member, which is the same as the original
one, in a lowered position.
Figure 2.12 shows an implementation example.
The connection of the cross member in the new position must be implemented in the same way and using screws of the same type
(diameter and resistance class) as originally foreseen.
Loosening prevention systems must be used in the connections.
Figure 2.12
173258
1. Frame side member - 2. Bracket for the lowered cross member
For vehicles with a 3000 mm wheel base, in order to avoid possible interference with parts of the rear suspensions, IVECO
provides a different solution that is implemented with specific ”C” shaped reinforcements positioned inside the vertical rib of the
side members.
Figure 2.13
173259
1. Frame side member - 2. Bracket for the lowered cross member
1
2
13-pin electrical coupling
If it is not fit during production, it can be retrofitted according to the information provided in paragraph 5.4.4.