Iveco DAILY M.Y. 2012, Body Builder Instructions

Page: 204 / 252

5-50
SPECIAL INSTRUCTIONS FOR ELECTRONIC SUBSYSTEMS D
AILY
Base - 02/2012 Printed 603.95.241
Electrical system: modifications and drawing-off power
Precautions
- Incorrect installation of electrical accessories may affect occupant safety and cause severe damage to the vehicle. Contact IVECO
if you have any questions.
- Avoid coupling with signal transmission cables (e.g. ABS), for which a preferential path has been defined for electromagnetic
requirements (EMI).
It should be noted that when grouping several cables together, in order to compensate for the lower heat dispersal capacity
current intensity must be reduced with respect to the nominal value of a single cable.
- In vehicles with frequent engine start-ups, with limited current drawn and engine rotations (e.g. vehicles with refrigeration
chambers), provide for periodic battery charging to maintain efficiency.
- The connections with plugs and terminals shall be of the protected, weather-proof type. Components of the same type as the
one originally fitted to the vehicle shall be used.
- Whenever various applications or modifications should require assemblies (various components etc.) to be moved, this is
permissible on the condition that their functionality is not compromised, that the original type of connection is restored and
that their transverse position on the chassis is not substantially changed when required by their weight.
- In the event that a component has be installed just next to the route of a cable belonging to the original system, or a cable route
needs be changed, the same can be relocated provided that its integrity is maintained (cuts shall not be made).
Figure 5.39
YES
!
Any damage caused by the failure to comply with the procedure shall not be covered by the warranty.