HunterLab EasyMatch QC, User Manual

Page: 174 / 366

EasyMatch QC User’s Manual Version 2.1
7-6 The Options Menu
desired boxes. Also choose the Illuminant/Observer combination for which you would like to display
Haze.
Note: Haze is available only with the ColorQuest XE, ColorQuest II Sphere, UltraScan XE,
UltraScan PRO, and UltraScan VIS sensors.
If you select Multiple Read Mode , two readings are made and displayed each time measurement is
initiated, one in each of the two standardization modes chosen using the Configure Multi Mode
command in the Sensor menu.
Note: Multiple Read Mode is available only with the ColorQuest XE, LabScan XE, UltraScan XE,
UltraScan PRO, and UltraScan VIS sensors.
Note: The averaging feature activated by clicking Average in the Measurements menu cannot be
used in conjunction with multimode reading. You may average selected readings that result from the
multimode reading after the readings are completed by using the Average Selected to... commands
in the Measurements menu.
The current read method controls how standard and sample measurements are taken. Be sure that the
sensor is standardized in RSIN (or the normal reflectance mode for a 45°/0° or 0°/45° instrument) mode
when using opacity and in TTRAN mode when using haze.