HunterLab EasyMatch QC, User Manual

Page: 52 / 366

EasyMatch QC User’s Manual Version 2.1
Introduction to EasyMatch QC 1-41
Make your selections for each parameter, including the color scale, fourth trace, and
illuminant/observer combination. A line and point display is shown in the example at the beginning
of this section. A column display graphs each data point as a rectangle above or below the standard
line.
Note: When Statistics are displayed in the Trend Plot, they are calculated based on the values of all
the samples shown. The standard values are not included.
•
Limits: This command allows you to set parameters regarding the scale and limits of the trend plot.
Make your selections for each parameter. The range for each trace is the number of trace units that
will be displayed around the standard for the trace. The control limit and warning limit are
percentages of the tolerance for the trace or the number of standard deviations from the sample
average where indicator lines will be shown (red for the control limit and purple for the warning
limit).
•
Print Preview: This command shows you on-screen what the view will look like when printed.