HunterLab EasyMatch QC, User Manual

Page: 183 / 366

EasyMatch QC User’s Manual Version 2.1
The Options Menu 7-15
Options/Data Send
The Data Send command in the Options menu opens a submenu with two commands: Send Data and
Configure .
The Send Data option initiates sending the readings that are currently highlighted in the Job Tree in the
format that was chosen using the Configure command, described below. You are first prompted for the
output device, and then the data is sent to the device when you click OK .
The Configure option allows you to choose the parameters you would like to send when Data Send is
selected. The screen below is obtained.
The information currently selected for sending is displayed on the left side of this window, and all of the
available parameters are listed on the right side of the window. Select each desired item from the drop-
down menus on the right side of the window and then click on the
left arrow ( << ) button nearest the
item to move the item into the Selected Items list. Highlight each item to delete on the left side of the
window and click the
right arrow ( >> ) button to remove it from the list. The up arrow and down