HunterLab EasyMatch QC, User Manual

Page: 238 / 366

EasyMatch QC User’s Manual Version 2.1
UltraScan VIS 11G-11
3. Connect the air compressor to the lower input port of the modified sample clamp assembly using the
1/4” tubing. Also connect the compressor to a power source.
To operate the compression clamp assembly:
1. Temporarily replace the modified port insert with the original port insert.
2. Standardize the instrument and then return the modified port insert to the port.
3. Weigh the specified amount of sample material into the sample cup. The fibers should completely
fill the sample cup. For comparability of measurements, the same weight of sample should always
be used.
4. Place the sample cup into the cup holder port plate. Adjust the location of the sample clamp to hold
the cup in place. The front button on the arm raises and lowers the arm, while the back button
moves the clamp in and out.