HunterLab EasyMatch QC, User Manual

Page: 289 / 366

EasyMatch QC User’s Manual Version 2.1
12-6 Instrument Replacement, Repair, Problems, and Questions
When You Need Assistance
When you have a problem with an instrument or software or need technical advice concerning a specific
application, you may contact HunterLab for assistance. In order to help us help you, please have the
following information available prior to telephoning HunterLab.
Note: If at all possible, make your call within operational range of the instrument and computer so
that troubleshooting steps can be performed as directed while on the phone.
1. The type of sensor you need assistance with (i.e., ColorFlex 45/0, MiniScan XE Plus Diffuse SAV,
or UltraScan XE).
2. The serial number of the instrument (usually found on a tag on the back or bottom of the sensor, or
inside the transmission compartment).
3. The type of software you use to access the sensor output (EasyMatch QC), the version of the
software (seen after choosing About from the Help menu), the operating system, and the brand and
type of computer.
4. The specific nature of the problem, including the exact error message received or the number of
units the sensor reads “off” from the standard tiles.
5. The steps performed prior to the start of the problem.
6. Steps already performed to reconcile the problem and/or results of any diagnostics.
7. The type of product being measured.
8. Operating environmental conditions under which the instrument is normally used, such as
temperature, humidity, dust, fumes, etc.
9. Whether the instrument has recently been moved or the computer reconfigured.
10. The name(s) of any HunterLab personnel with whom you have previously discussed the problem.
The general number for HunterLab is 703-471-6870. To place an order, for prices on instruments,
software, or replacement parts, or to return damaged or incorrect parts, ask for the
ORDER
PROCESSING DEPARTMENT . For applications advice, for help in correcting instrument or software
problems, to return instruments to HunterLab for service, or to ask questions about the servicing or
recalibration of instruments, ask for
TECHNICAL SUPPORT .
HunterLab may also be contacted through its web site, www.hunterlab.com.
The mailing address for HunterLab headquarters is given below. Customers outside the United States
should contact their HunterLab distributor for initial assistance.
Hunter Associates Laboratory, Inc.
11491 Sunset Hills Road
Reston, Virginia 20190 U.S.A.