HunterLab EasyMatch QC, User Manual

Page: 20 / 366

EasyMatch QC User’s Manual Version 2.1
Introduction to EasyMatch QC 1-9
See Lesson 5 in the next chapter for detailed instructions on using a hitch standard.
•
Show This Item Only: This command appears for standards only and causes the chosen standard
and its associated samples alone to be displayed in the Job Tree. All other standards and samples are
removed from the Job Tree display.
•
Copy Sample To Standard: This command appears for samples only and causes the highlighted
sample measurement to replace the current standard measurement in the Job Tree, while retaining
the sample’s ID.
•
Copy Sample to New Standard: This command appears for samples only and causes the
highlighted sample measurement to be added to the job as a standard as well, while retaining the
sample’s ID.
•
Copy Standard To Sample: This command appears for standards only and causes the highlighted
standard measurement to be placed in the Job Tree as a sample on that standard’s branch. You are
given the opportunity to name the new sample.
•
Copy Standard To New Standard: This command appears for standards only and causes the
highlighted standard measurement to be added to the job as a second instance of the standard, while
retaining the original standard’s ID.
When the right mouse button is clicked on an open area of the Job Tree view (an area other than a
sample or standard), further commands are available, as follows:
•
Print Preview: This command shows on-screen what the Job Tree will look like when printed.