HunterLab EasyMatch QC, User Manual

Page: 39 / 366

EasyMatch QC User’s Manual Version 2.1
1-28 Introduction to EasyMatch QC
•
Change View: This command allows you to replace the current view with another type of view
(i.e., replace the 2D Color Plot with a Spectral Plot).
•
Delete View: This command allows you to remove the current view from the job display.
•
Split View Vertically and Add: This command splits the current view into two and adds a new
view so that the old view and the new view are displayed side by side.
•
Split View Horizontally and Add: This command splits the current view into two and adds a new
view so that the old view and the new view are displayed with one above the other.
•
Maximize this View: This command causes the currently-selected view to be enlarged to the full
size of the job.
•
Restore View: This command restores the screen to its previous configuration after one view has
been maximized.
EZ View
The EZ View is a simple, eye-catching display of a limited amount of color data: up to four fields of
color scale, difference, and/or index data, as well as pass/fail status if tolerances have been defined for
the standard.
Click on this view to make it active. While this view is active, the following options are available by
clicking the right mouse button:
•
Configure: This command allows you to set various preferences pertaining to the EZ View.