HunterLab EasyMatch QC, User Manual

Page: 210 / 366

EasyMatch QC User’s Manual Version 2.1
8-14 The Sensor Menu
Use the scroll bar next to Setup Number or type a setup number into the box to choose a setup with
which to work. If you wish to begin working with the version of the setup that is already resident in
your instrument, click
Retrieve . If you wish to work with the version of the setup that is shown on-
screen, do not click Retrieve .
Alter the setup parameters as desired. The parameters and selections available are the same as those
configured through your instrument firmware. If you are using a physical standard, you may click the
Read Standard button to read the standard to be saved with the setup using your instrument or Recall
Standard to recall a standard from your EasyMatch QC database to be saved with the setup.
When all parameters are as desired for this setup, click Update Sensor to send the setup to your
instrument. You may retrieve all the setups from the instrument at once using the Retrieve All button or
send all the setups back to the instrument at once using the Update All Setups button.
This feature is described in more detail in Lesson 7 of Chapter 2.