HunterLab EasyMatch QC, User Manual

Page: 42 / 366

EasyMatch QC User’s Manual Version 2.1
Introduction to EasyMatch QC 1-31
Click anywhere in the white portion of the view and begin typing to enter your memo. Text does not
wrap, so you will want to use the
Enter key at the end of each line to proceed to the next line. While
this view is active, the following options are available by clicking the right mouse button:
•
Cut: Before using the Cut command, use the mouse to highlight the text you wish to remove from
the Memo View. Then select Cut to permanently remove it from the view. If you wish, you may
paste the text elsewhere, such as in a word processing program.
•
Copy: Before using the Copy command, use the mouse to highlight the text you wish to copy to the
Windows clipboard. Then select Copy to copy it. If you wish, you may paste the text elsewhere,
such as in a word processing program.
•
Paste: Before you may use the Paste command, you must have copied text to the Windows
clipboard from another job or another program. Then, select Paste to paste it into the Memo View.
•
Select All: This command allows you to highlight (select) all the text currently in the Memo View
in order to take action on it, such as by setting its font or copying it.
•
Delete: Before using the Delete command, use the mouse to highlight the text you wish to remove
from the Memo View. Then select Delete to permanently remove it from the view.
•
Font: Before using the Font command, use the mouse to highlight the text for which you wish to
modify the font. Then select Font to obtain the following screen on which you may select the text
font, size, and color for the highlighted text.