HunterLab EasyMatch QC, User Manual

Page: 54 / 366

EasyMatch QC User’s Manual Version 2.1
Introduction to EasyMatch QC 1-43
•
Change View: This command allows you to replace the current view with another type of view
(i.e., replace the 2D Color Plot with a Spectral Plot).
•
Delete View: This command allows you to remove the current view from the job display.
•
Split View Vertically and Add: This command splits the current view into two and adds a new
view so that the old view and the new view are displayed side by side.
•
Split View Horizontally and Add: This command splits the current view into two and adds a new
view so that the old view and the new view are displayed with one above the other.
•
Maximize this View: This command causes the currently-selected view to be enlarged to the full
size of the job.
•
Restore View: This command restores the screen to its previous configuration after one view has
been maximized.
Database
The database is a permanent repository of all spectral data and ID information for standards and samples
that have been specifically saved to the database. When tolerances are assigned to standards, the
tolerances can also be saved to the database with the standard. Data that has been saved to the database
may be recalled in any job, but data that has been saved into a job has not necessarily been saved to the
database. Use of the database is not required. Measurements may be permanently stored only in jobs if
desired. The database is in a Microsoft Access (.MDB) or SQL Server format. See the File Menu
chapter (Chapter 3) for information on saving data to the database and recalling data from the database
and the Options Menu chapter (Chapter 7) for information on configuring the database type and
location. Once the database is configured, its name is displayed on the EasyMatch QC title bar after the
job name.