Honda NC700 2012, Service Manual

Page: 710 / 773

20-29
dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
ABS MODULATOR
REMOVAL/INSTALLATION (NC700XA/
SA)
Be careful not to bend or damage the brake pipes
during assembly or removal.
Remove the following:
– Delay valve (page 20-28)
– PCV (page 20-28)
Pull up the lock lever [1] and disconnect the ABS
modulator 25P connector [2].
Release the main wire harness clamp(s) [3] from the
ABS modulator stay.
Loosen the brake pipe joint nuts [1] and disconnect the
brake pipes from the ABS modulator.
Remove the ABS modulator stay mounting bolts [1],
collars [2] and ABS modulator assembly [3].
Be careful not to bent or damage the brake pipes.
[3]
[1]
[2] [3] (NC700XA only)
NC700XA shown:
[1]
[1]/[2] [3]