Honda NC700 2012, Service Manual

Page: 242 / 773

5-11
dummyhead dummyhead
IGNITION SYSTEM
Disconnect the primary wire connectors [1] from the
ignition coil.
Release the clamp [2] from the frame tab.
Remove the bolts [3], spacers [4] and ignition coil [5]
from the ignition coil stay.
Installation is in the reverse order of removal.
Route the wire properly (page 1-25).
CKP SENSOR
REMOVAL/INSTALLATION (NC700X/
XA/S/SA)
Remove the right crankcase cover (page 11-5).
Remove the wire grommet [1] from the right crankcase
cover.
Remove the CKP sensor mounting bolts [2] and CKP
sensor [3].
Installation is in the reverse order of removal.
• Apply locking agent to the CKP sensor mounting
bolts threads (page 1-23).
• Apply liquid sealant (Three bond 1207B or
equivalent) to the CKP sensor wire grommet sealing
surface.
REMOVAL/INSTALLATION (NC700XD/
SD)
Remove the right crankcase cover (page 12-97).
Remove the right crankcase cover wire clamp bolts [1]
and wire clamp [2].
[2]
[3]/[4] [1]
[5]
[3]
[2]
[1]
[2]
[1]