Honda NC700 2012, Service Manual

Page: 602 / 773

17-31
dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Install the oil lock piece [1] onto the fork piston [2] end.
Install the fork pipe [3] into the fork slider [4].
Do not over-tighten
the vise on the fork
slider.
Set the fork slider in a vise with a piece of wood or soft
jaws to avoid damage.
Install a new sealing washer [1] to the fork socket bolt
[2].
Apply locking agent to the fork socket bolt threads and
install it.
If the fork piston
turns with the
socket bolt,
temporarily install
the fork spring,
spring seat, spring
collar and fork cap.
Tighten the fork socket bolt [1] to the specified torque.
Drive the oil seal [1] until the stopper ring groove [2] is
visible using the special tools.
[4] [3] [2] [1]
[2]
[1]
TORQUE: 20 N·m (2.0 kgf·m, 15 lbf·ft)
[1]
TOOLS:
Fork seal driver [3]
07947-KA50100
Fork seal driver attachment [4] 07947-KF00100
[3] [2]
[1] [4]