Honda NC700 2012, Service Manual

Page: 608 / 773

17-37
dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Temporarily install the steering stem nut [1] onto the
steering stem [2] to prevent the threads from being
damaged when removing the lower inner race [3] from
the steering stem.
Remove the lower inner race with a chisel or equivalent
tools, being careful not to damage the steering stem.
Remove the steering head bearing dust seal [4].
Apply specified grease to a new steering head bearing
dust seal lips (page 1-23).
Install the steering head bearing dust seal [1] to the
steering stem.
Install a new lower inner race [2] using a hydraulic
press and special tool.
Drive in a new upper outer race [1] using the special
tools.
Drive in a new lower outer race [1] using the special
tools.
[2]
[1]
[3]
[4]
TOOL:
Attachment, 30 mm I.D. [3]
07746-0030300
[1] [3] [2]
TOOLS:
Driver [2]
07749-0010000
Attachment, 42 x 47 mm [3] 07746-0010300
[1]
[3] [2]
TOOLS:
Driver [2]
07749-0010000
Attachment, 52 x 55 mm [3] 07746-0010400
[1] [3]
[2]