Honda NC700 2012, Service Manual

Page: 465 / 773

12-110
dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
INSTALLATION
Apply 2 – 4 g (0.07 – 0.14 oz) of specified grease to the
reduction gear journals and teeth.
Install reduction gear B [1] and align the gear ends with
the ribs of the crankcase. Then install reduction gear C
[2] so the punch marks [3] on the gear and shift spindle
line up as shown.
Install reduction gear A [4].
Install the dowel pins [1] and a new gasket [2].
O-RING
14 N·m (1.4 kgf·m, 10 lbf·ft)
14 N·m (1.4 kgf·m, 10 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
TR SENSOR
O-RING
REDUCTION GEAR
CASE COVER
GASKET
REDUCTION GEAR A
REDUCTION GEAR B
REDUCTION GEAR C
SHIFT CONTROL MOTOR
SPECIFIED GREASE: Templex N3 grease (ESSO)
[4]
[2]
[1] Align
[3] Align
[2]
[1]