Honda NC700 2012, Service Manual

Page: 649 / 773

19-10
dummyhead dummyhead
HYDRAULIC BRAKE
Do not mix different
types of fluid. There
are not compatible.
Fill the reservoir with DOT 4 brake fluid from a sealed
container to the casting ledge [1].
Front brake:
Install the diaphragm [1], set plate [2], reservoir cover
[3] and reservoir cover screws [4], then tighten the
screws to the specified torque.
Rear brake:
Remove the 6 mm nut [1], rear brake reservoir
mounting bolt [2] and reservoir [3].
Install the diaphragm [4], set plate [5] and reservoir
cover [6].
Install and tighten the cover screws [7] to the specified
torque.
Install the reservoir and rear brake reservoir mounting
bolt.
Align the reservoir tab [8] with the reservoir stay upper
hole [9].
Tighten the bolt to the specified torque.
[1]
Front shown:
TORQUE: 1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
Front:
[3]
[1]/[2]
[4]
TORQUE: 1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
[1]
[7]
[2] [8] [3] [2] [3]
[9] Rear:
[4]
[5]
[6]