Honda NC700 2012, Service Manual

Page: 485 / 773

13-8
dummyhead dummyhead
ALTERNATOR/STARTER CLUTCH
Remove the washer [1] and needle bearing [2].
Remove the woodruff key [3].
Be careful not to damage the key groove and
crankshaft.
INSPECTION
STARTER REDUCTION GEAR/STARTER IDLE
GEAR
Check the starter reduction gear [1] and shaft [2] for
wear or damage and replace it if necessary.
Check the starter idle gear [3] and shaft [4] for wear or
damage and replace it if necessary.
NEEDLE BEARING
Check the needle bearing [1] for abnormal wear or
damage.
Replace it if necessary.
STARTER CLUTCH OPERATION
Check the operation of the one-way clutch by turning
the starter driven gear [1].
You should be able to turn the starter driven gear
counterclockwise smoothly, but the gear should not turn
clockwise.
For starter clutch service (page 13-10).
[1]
[3] [2]
[1]
[2]
[4]
[3]
[1]
[1]