Honda NC700 2012, Service Manual

Page: 617 / 773

18-4
dummyhead dummyhead
REAR WHEEL/SUSPENSION
SERVICE INFORMATION
GENERAL
• When servicing the rear wheel and suspension, support the motorcycle using a safety stand or hoist.
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc with a
high quality brake degreasing agent.
• After the rear wheel installation, check the brake operation by applying the brake pedal.
• Use only tires marked "TUBELESS" and tubeless valves on rim marked "TUBELESS TIRE APPLICABLE".
• Use genuine Honda replacement bolts and nuts for all suspension pivot and mounting point.
• For brake system information (page 19-5).
SPECIFICATIONS
Unit: mm (in)
TORQUE VALUES
ITEM STANDARD SERVICE LIMIT
Minimum tire tread depth – 2.0 (0.08)
Cold tire pressure Driver only 290 kPa (2.90 kgf/cm
2
, 42 psi) –
Driver and passenger 290 kPa (2.90 kgf/cm
2
, 42 psi) –
Axle runout – 0.2 (0.01)
Wheel rim runout Radial – 2.0 (0.08)
Axial – 2.0 (0.08)
Wheel balance weight
–
60 g (2.1 oz)
max.
Drive
chain Size/link NC700X/
XA/S/SA DID DID520V0-114LE –
RK RK520MKO-114LE –
NC700XD
/SD DID DID520V0-112LE –
RK RK520MKO-112LE –
Slack NC700X/XA/XD 30 – 40 (1.2 – 1.6) –
NC700S/SA/SD 25 – 35 (1.0 – 1.4) –
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Driven sprocket nut 5 12 108 (11.0, 80) U-nut
Rear brake disc mounting bolt 5 8 42 (4.3, 31) ALOC bolt; replace with a new one.
Rear axle nut 1 18 98 (10.0, 72) U-nut
Shock absorber mounting nut 2 10 44 (4.5, 32) U-nut
Shock arm nut 1 10 44 (4.5, 32) U-nut
Shock link nut 2 10 44 (4.5, 32) U-nut
Drive chain slider mounting screw 2 5 5.9 (0.6, 4.4)
Swingarm pivot nut 1 18 98 (10.0, 72) U-nut
Step holder mounting socket bolt 4 8 32 (3.3, 24)
Gearshift arm pinch bolt
(NC700X/XA/S/SA) 1 6 12 (1.2, 9) ALOC bolt; replace with a new one.