Honda NC700 2012, Service Manual

Page: 29 / 773

1-24
dummyhead dummyhead
GENERAL INFORMATION
FRAME
MATERIAL LOCATION REMARKS
Urea based multi-purpose
grease with extreme
pressure
(example: Kyodo Yushi
EXCELITE EP2, Shell
Stamina EP2 or equivalent) Steering head bearing sliding surface 3 – 5 g (0.1 – 0.2 oz)
Steering head dust seal lips
Molybdenum disulfide grease Shock arm needle bearings
Rear shock absorber needle bearing
Rear shock absorber dust seal lips
Swingarm pivot needle bearings
Swingarm pivot ball bearing
Swingarm pivot dust seal lips
Multi-purpose grease Seat catch hook sliding area
Luggage box lid catch sliding area
Gearshift pedal pivot and dust seal lips (NC700X/XA/S/SA)
Gearshift pedal tie-rod ball joint area (NC700X/XA/S/SA)
Throttle cable end and throttle grip pipe flange groove
Front wheel dust seal lips
Rear wheel hub O-ring
Rear wheel dust seal lips
Rear axle sliding surface
Swingarm pivot sliding surface
Rear brake pedal pivot sliding area
Parking brake ratchet A, B teeth and sliding surface
(NC700XD/SD)
Parking brake lever, washer sliding surface (NC700XD/SD)
Parking brake switch spring sliding surface (NC700XD/SD)
Main step sliding area
Pillion step sliding area
Cable lubricant Seat lock cable inside
Luggage box lid lock cable inside
Throttle cable A, B inside
Clutch cable inside (NC700X/XA/S/SA)
Parking brake cable inside (NC700XD/SD)
Honda bond A, Cemedine
#540 or equivalent Handlebar grip rubber inside
Brake pad retainer mating surface
Silicone grease Front brake lever sliding surface and lever-to-master piston
contacting area 0.10 g (0.004 oz)
Rear brake master cylinder push rod sliding surface and boot
fitting area
Brake caliper dust seals
Rear brake caliper boot inside
0.4 g (0.01 oz)
Brake pad pin stopper ring
Parking brake shaft outer surface (NC700XD/SD)
0.4 g (0.01 oz) minimum
Parking brake adjuster bolt threads and caliper piston sliding
surface (NC700XD/SD) 0.4 g (0.01 oz) minimum
Parking brake shaft boot lips (NC700XD/SD) 0.4 g (0.01 oz) minimum
Parking brake caliper bracket pin sliding surface (NC700XD/
SD) 0.4 g (0.01 oz) minimum
Parking brake caliper sleeve sliding surface (NC700XD/SD) 0.4 g (0.01 oz) minimum
DOT 4 brake fluid Brake caliper piston and piston seals
Brake master piston and cups
Brake master cylinder inside
Rear master cylinder reservoir hose joint O-ring
Fork fluid Fork cap O-ring
Fork dust seal and oil seal lips
Drive chain lubricant
designed specifically for use
with O-ring chains, #80 – 90
gear oil or equivalent Drive chain whole surface