Honda NC700 2012, Service Manual

Page: 563 / 773

16-20
dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Install the following:
– Fuel tank drain hose B [1]
– Sidestand switch wire [2]
– Neutral switch wire [3]
Install the setting plate [4] and a new bolt [5].
Align the setting plate hole with the crankcase boss.
Install the wire band [6].
Connect the neutral switch connector [7].
Route the alternator wire harness [1].
Install the sidestand switch wire harness clamp [2].
Connect the alternator 3P (Black) connector [1].
Install the rear fender B [1] and socket bolts [2].
Tighten the socket bolts securely.
Install the rear brake reservoir stay/reservoir [3] and
bolt [4].
Align the rear brake reservoir stay with the frame tab.
Tighten the bolt securely.
[2]
[6]
[7]
[1]
[4]/[5]
[3]
Align
[1]
[2]
[1]
[3]
[4] [2] [2] [1]
Align