Honda NC700 2012, Service Manual

Page: 160 / 773

3-29
dummyhead dummyhead
MAINTENANCE
REAR SUSPENSION INSPECTION
Check the action of the rear shock absorber by
compressing the rear end several times.
Check the entire shock absorber assembly for leaks,
damage or loose fasteners.
Replace damaged components which cannot be
repaired.
Loose, worn or damaged suspension parts impair
motorcycle stability and control.
Tighten all nuts and bolts.
For shock absorber service (page 18-14).
Support the motorcycle using a safety stand or hoist,
raise the rear wheel off the ground.
Check for worn swingarm bearings by grabbing the rear
wheel and attempting to move the wheel side to side.
Replace the bearings if any looseness to noted.
For swingarm service (page 18-16).
NUTS, BOLTS, FASTENERS
Check that all chassis nuts, screws and bolts are
tightened to their correct torque values (page 1-15).
Check that all cotter pins, safety clips, hose clamps and
cable stays are in place and properly secured.
WHEELS/TIRES
Support the motorcycle using a safety stand or hoist,
raise the front wheel off the ground.
Hold the front fork leg and move the front wheel
sideways with force to see if the wheel bearings are
worn.
For front wheel service (page 17-20).
Support the motorcycle using a safety stand or hoist,
raise the rear wheel off the ground.
Hold the swingarm and move the rear wheel sideways
with force to see if the wheel and driven flange bearings
are worn.
For rear wheel service (page 18-6).