Honda NC700 2012, Service Manual

Page: 589 / 773

17-18
dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Install the master cylinder [1], holder [2] ("UP" mark [3]
facing up) and bolts [4].
Align the end of the master cylinder with the punch
mark on the handlebar and tighten the upper bolt first,
then the lower bolt to the specified torque.
Connect the brake light switch connectors [5].
Install the left handlebar switch housing [1].
Align the switch housing locating pin with the handlebar
hole.
Install the screws [1] and tighten the upper screw first,
then tighten the lower screw to the specified torque.
Install the parking brake lever bracket [1].
Align the parking brake lever bracket locating pin with
the handlebar hole.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
[5]
[1]
[4]
[2] Align
[3]
[1]
Align
TORQUE: 2.5 N·m (0.3 kgf·m, 1.8 lbf·ft)
[1]
Align
[1]