Honda NC700 2012, Service Manual

Page: 369 / 773

12-14
dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
3. Make sure the engine stop switch is turned to " ".
While pushing the shift switch (+) [1], turn the ignition switch to ON.
4. Push the shift switch (–) [1].
5. Push the shift switch (+) [2].
6. The self-diagnostic memory is erased if the shift indicator "–" goes off and starts blinking as shown.
Note that the self-diagnostic memory cannot be erased if the ignition switch is turned to "OFF" before the shift indicator "–" starts
blinking.
7. Turn the ignition switch OFF.
8. Remove the special tool from the DLC.
[1]
[1]
[1]
[2]
[2]
ON
OFF
3 sec.
Pattern repeated
2 sec. 2 sec. 2 sec.
1 cycle
3 sec. 3 sec.