Honda NC700 2012, Service Manual

Page: 704 / 773

20-23
dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
2. Power Input Line Short Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 25P connector [1].
With the ABS fuse 7.5 A (ABS MAIN) removed,
check for continuity between the ABS modulator
25P connector of the wire harness side and ground.
Is there continuity?
YES – Short circuit in Red/black wire
NO – Intermittent failure. Replace the ABS fuse
7.5 A (ABS MAIN) with a new one, and
recheck.
3. Power Input Line Open Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 25P connector [1].
Turn the ignition switch ON and engine stop switch
" ".
Measure the voltage between the ABS modulator
25P connector of the wire harness side and ground.
Does the standard voltage exist?
YES – GO TO STEP 4.
NO – Open circuit in Red/black wire between the
ABS modulator 25P connector and ignition
switch
4. Failure Reproduction
Turn the ignition switch OFF.
Connect the ABS modulator 25P connector.
Erase the problem code (page 20-9).
Test ride the motorcycle above 30 km/h (18 mph).
Retrieve the problem code (page 20-8) and recheck
the ABS indicator [1].
Does the ABS indicator indicate the code "61 or
62"?
YES – Faulty ABS modulator
NO – Power circuit is normal (intermittent failure)
Connection: Red/black – Ground
TOOL:
Test probe
07ZAJ-RDJA110
R/Bl
[1]
Connection: Red/black (+) – Ground (–)
Standard:
Battery voltage
TOOL:
Test probe
07ZAJ-RDJA110
R/Bl
[1]
[1]