Honda NC700 2012, Service Manual

Page: 709 / 773

20-28
dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
PCV
REMOVAL/INSTALLATION
Drain the brake fluid from the lever/pedal brake line
hydraulic systems (page 19-11).
Remove the luggage box (page 2-19).
Loosen the brake pipe joint nuts [1] and disconnect the
brake pipe from the PCV [2].
Remove the PCV mounting bolt (long) [3], PCV
mounting bolt (short) [4] and PCV.
Be careful not to bent or damage the brake pipes.
Installation is in the reverse order of removal.
Apply brake fluid to the joint nut threads and sliding
surface.
DELAY VALVE
REMOVAL/INSTALLATION
Drain the brake fluid from the lever/pedal brake line
hydraulic systems (page 19-11).
Remove the luggage box (page 2-19).
Loosen the brake pipe joint nut [1], and disconnect the
brake pipe from the delay valve [2].
Remove the delay valve mounting bolts [3] and delay
valve.
Be careful not to bent or damage the brake pipes.
Installation is in the reverse order of removal.
Apply brake fluid to the joint nut threads and sliding
surface.
TORQUE:
PCV mounting bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
Brake pipe joint nut:
14 N·m (1.4 kgf·m, 10 lbf·ft)
[1]
[3]
[2]
[4]
TORQUE:
Delay valve mounting bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
Brake pipe joint nut:
14 N·m (1.4 kgf·m, 10 lbf·ft)
[1]
[2] [3]