GE UR series, Manual

Page: 376 / 432

3-160 UR SERIES – COMMUNICATIONS GUIDE
SCL LOG MESSAGES CHAPTER 3: IEC 61850 COMMUNICATION
3
No DOType=<data object type> for DO=<data object> in new IED
In the new CID IED section, the data object type cannot be found for the specified data object.
No DOType=<data object type> for DO=<data object> in existing IED
In the existing CID IED section, the data object type cannot be found for the specified data object.
DO=<data object> in LNodeType=<logical node type> is different in new IED
The logical node type in the new CID file differs from the supported type.
Number of LDevice mismatch: NEW(<number of logical devices>) ApName=<ApName> (IED=<IED name>) -
REF(<number of logical devices>) ApName=<ApName> (IED=<IED name>)
The model does not match due to number of logical devices mismatch. The number of logical devices in the new CID file is
different from that in the reference file in the device.
Number of LN mismatch: NEW(<number of logical nodes>) ApName=<ApName> (IED=<IED name>) -
REF(<number of logical nodes>) ApName=<ApName> (IED=<IED name>)
The model does not match due to number of logical nodes mismatch. The number of logical nodes in the new CID file is
different from that in the reference file in the device.
NO LDevice=<logical device> in IED=<IED name>
No logical devices were found in the IED section of the CID file.
NO LN=<prefix of logical node><lnClass><logical node> not found
The specified logical node is not found.
No LNodeType=<logical node type> found for LN=<logical node> in new IED
The specified logical node type is missing in the new CID file.
No LNodeType=<logical node type> found for LN=<logical node> in existing IED
The specified logical node type is missing in the existing CID file.
New DOType=<data object type> has different number of DA
The number of data attributes in the specified data object type is not supported.
New DOType=<data object type> has different cdc
The CDC of the specified data object type is not supported.
No DA=<data attribute> found in DOType=<data object type>
The specified data object type has no data attributes.
No DOType=<data object type> found for SDO=<data object> in new IED
The specified data object type is missing in the new CID file.
No DOType=<data object type> found for SDO=<data object> in existing IED
The specified data object type is missing in the existing CID file.
DOType=<new data object type> mismatch vs <reference data object type>
The DOType of the specified data object in the new CID file does not match the reference file.