GE UR series, Manual

Page: 346 / 432

3-130 UR SERIES – COMMUNICATIONS GUIDE
MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) CHAPTER 3: IEC 61850 COMMUNICATION
3
DeadEx1Tmcs ING This timer is used to set the length of the dead time 1 extension for possible non-
simultaneous tripping of the two ends of the line
Rec13pRREC
DeaV1 SPS This data object indicates that V1 is below the DeaVal1 setting. SynChkRSYN
DifA2ndH WYE Differential current PctDifPDIF1
DifA5thH WYE Differential current PctDifPDIF1
DirSupn SPS Directional overcurrent supervision status GndDisPDIS
Disabled SPS Function is disabled Rec3pRREC,
Rec13pRREC
DistDet SPS Sensitive current disturbance detector.
For PwrSwgRPSB1, power swing element detected disturbance other than power
swing.
LinDfPDIF,
PwrSwgRPSB1
Dpo SPS Inverse of Str AgeSPTR1,
AuxOvPTOV,
AuxUvPTUV,
B_IocPIOC,
B_EfpPIOC,
B_TocPTOC,
B_UvPTUV,
BusDifPDIF,
CmpOvPTOV,
DigElGAPC,
FlxElGAPC,
GndIocPIOC,
GndTocPTOC,
HPTmpSPTR1,
LinPkpPIOC,
NegIocPIOC,
NegOvPTOV,
NegTocPTOC,
NeuIocPIOC,
NeuTocPTOC,
NeuOvPTOV,
OvHzPTOF,
PhsIocPIOC,
PhsOvPTOV,
PhsTocPTOC,
PhsUvPTUV,
RgDifPDIF,
RteHzPFRC,
SenPDOP, Sen1PDOP,
Sen2PDOP,
UnHzPTUF,
VpHzPVPH, VtffGAPC
DpoBia SPS B90 Drop-out of Biased indicates the dropping of pick-up condition for biased
differential element
B_DifPDIF
DpoPhs1 SPS Inverse of per phase pickup (Pkp) PhsTocPTOC,
PhsIocPIOC,
PhsOvPTOV,
B_TocPTOC,
BusDifPDIF,
GndDisPDIS,
PhsDisPDIS,
PhsIocPIOC,
PhsTocPTOC,
PhsUvPTUV,
SttDifPDIF
DrcDevOff SPS A direct device is configured but not connected LPHD
DrcRingBrk SPS The Direct I/O settings is for a ring but the connection is not in a ring LPHD
DscDlTmms ING Time delay in milliseconds allowed with discrepant pole position till discrepancy is
declared
Bkr?XCBR
Ena1 SPS Function is Enabled Rec3pRREC,
Rec13pRREC
Data object
name
CDC Semantics Used in logical
nodes…