GE UR series, Manual

Page: 362 / 432

3-146 UR SERIES – COMMUNICATIONS GUIDE
SCL LOG MESSAGES CHAPTER 3: IEC 61850 COMMUNICATION
3
No LN=<fcda prefix><lnClass>,lnInst> found in LD=<LD>
This message is logged when the associated logical node is not found in the device. The GOOSE subscription parsing is in
progress at this stage.
No LD=<ldInst> found in IED=<IED name>
This message is logged when the associated logical device is not found. The GOOSE subscription parsing is in progress at
this stage.
g2_process_goose_extref: error mapping data=<btype from publisher fcda> to ExtRef=<internal address>
This message is logged when the datatype of the publisher FCDA does not match the one defined in the associated extRef.
The GOOSE subscription parsing is in progress at this stage.
add_missing_extref: error to add ExtRef intAddr=<internal address> desc=<desc>
This message is logged when the number of extRefs are less than the number supported. The GOOSE subscription parsing
is in progress at this stage.
extref_intaddr_check: too many GGIO3.extref
This message is logged when the number of extRefs defined in GGIO3 are greater than the number supported. The GOOSE
subscription parsing is in progress at this stage.
g2_map_goose_inref: GGIO3 missing
This message is logged when the GGIO3 logical node is missing. The GOOSE subscription parsing is in progress at this
stage.
ERROR Inref to ExtRef conversion: setSrcRef=<value>
This message is logged when there are no more extRefs left to map an inRef. The GOOSE subscription parsing is in progress
at this stage.
Error of RxGOOSE InRef.setSrcRef=<value> InRef.setSrcCB=<value>
This message is logged when inRef conversion to extRef fails. The GOOSE subscription parsing is in progress at this stage.
g2_process_goose_inref: no matching setSrcRef found in LN=<logical node> for setSrcCB=<value>
This message is logged when the source reference in setSrcRef is not found. The GOOSE subscription parsing is in progress
at this stage.
g2_find_duplicate_extref: GGIO3 missing
This message is logged when the logical node GGIO3 is not found. The GOOSE subscription parsing is in progress at this
stage.
g2_find_duplicate_extref: duplicate external source found in <first extref internal address> and <internal
address>
This message is logged when a duplicate extRef is found. The GOOSE subscription parsing is in progress at this stage.
E3-2.0 ERROR: target iedName or apName missing
This message is logged when iedName or apName of the target IED is missing. The GOOSE subscription parsing is in
progress at this stage.
E3-2.0 ERROR: missing IED=<IED name>
This message is logged when the IED cannot be located. The GOOSE subscription parsing is in progress at this stage.