GE UR series, Manual

Page: 338 / 432

3-122 UR SERIES – COMMUNICATIONS GUIDE
MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) CHAPTER 3: IEC 61850 COMMUNICATION
3
3.5.6 General (Gen) logical device
The Ctrl logical device contains logical nodes that model UR FlexLogic, Virtual Outputs, non-volatile latches, FlexElements,
and recording (for example, oscillography) functions.
The Ctrl logical device is available when the Advanced IEC 61850 option is purchased with the UR device.
3.5.6.1 Logical node zero (LLN0)
LLN0 is instantiated in all UR series devices implementing the Gen logical device.
Table 3-109: LLN0 data objects
3.5.6.2 Data logger (DatLog)
This element is instantiated in the following products: C30, C60, C70, D60, F35, F60, G30, G60, L30, L60, L90, M60, N60, T35,
T60.
Table 3-110: Data logger data objects
pulseConfig
.numPls
INT32U 1
R
ctlModel
CtlModels
CF EnrMtrMMTR1.RsStat.ctlModel
1, the code for direct control with normal
security; 2 is code for SBO with normal
security.
R/W/C
sboTimeout
INT32U
CF
30000
R
sboClass
SboClasses
CF
0 (operate-once)
R
operTimeout
INT32U
CF
0
R
InRef1 ORG CLEAR ENERGY setting.
R
setSrcRef
ObjectReference
SP setting reference to clear Energy,
which shows the receiving of
dynamically clearing signal for
energy calculation
Reference to the data attribute to input
R/C
setSrcCB
ObjectReference
SP
Source GoCB of input if via GOOSE
R/C
LNName: LLN0 LDevice inst: Gen
data obj. data attribute Type FC UR Name Description R/W/C
NamPlt LPL Logical node Prot configuration
information
R
vendor VISIBLE
STRING255
DC Mapped to LPHD1/PhyNam.vendor R
swRev VISIBLE
STRING255
DC Mapped to LPHD1/PhyNam.swRev R
configRev VISIBLE
STRING255
DC Gen configRev The factory default value is the empty
string
R
ldNs VISIBLE
STRING255
EX IEC 61850-7-4:2007B R
GrRef ORG Reference to the next higher-level
logical device (LD)
R
setSrcRef ObjectReference SP In communications, the Master ldName
setting if not empty, otherwise the
concatenation of the IED name and
“Master”.
In SCL, the concatenation of the IED
name and “Master”.
R
LNName:
DatLogRDRE1
LDevice inst:
Gen
UR element:
Data Logger
data obj. data attribute Type FC UR Name Description R/W/C
FltNum INS Fault number
R
LNName:
EnrMtrMMTR#
LDevice inst:
Meter
UR element:
Signal Source # Energy Metering
data obj. data attribute Type FC UR Name Description R/W/C