Gambro AK 98, Operator'S Manual

Page: 157 / 386

HCEN12745 Revision 10.2016
Program version 2.xx
AK 98 Dialysis Machine - Disinfection and cleaning A:155
Procedure
1) Press the
Disinfection
button.
2) Select the
Chemical
tab.
3) Select disinfectant.
4) Connect the disinfectant. From the front of
the machine: connect the blue concentrate
connector to the yellow pick-up tube.
5) Place the pick-up tube in the disinfectant
solution.
WARNING!
After a chemical disinfection
program, a test for residues
shall be performed prior to
connecting a patient to the
dialysis machine to make
sure that no residues exist in
the dialysis machine.
6) Press the On/Off button to schedule the
dialysis machine to stop after the
disinfection fill-up is completed.
7) When the disinfection fill-up phase is
completed there is an attention (or the
machine stops).
8) Remove the pick-up tube from the
disinfectant solution and return the blue
concentrate connector to its stand-by port.
10.6.2 Start using a dialysis machine filled with chemical disinfectant
WARNING!
After a chemical disinfection program, a test for residues shall be performed prior to
connecting a patient to the dialysis machine to make sure that no residues exist in
the dialysis machine.
A dialysis machine that has been stored with chemical disinfectant
must be
disinfected and rinsed before use.
Procedure
1) Press the On/Off button.
2) The dialysis machine automatically starts a
disinfection and rinse program.
An operator message appears when the
disinfection program is ready.
3) To start a new treatment : Press
Confirm
to reset previous values and start the
functional check (extended).