Furuno GD-280, Operator'S Manual

Page: 67 / 280

2-29
2.8.3 Erasing track between two points
1. Press [MENU], [2], [7]. The following message appears.
2. Place the +cursor on the starting point of the track to erase and press the [ENT] key. The
following message appears.
3. Place the +cursor on the end point of the track to erase and press the [ENT] key. You are
asked if it is all right to erase the track.
4. Press the [ENT] key.
5. Press the [MENU] key several times to close the menu.
Note: Unconnected track cannot be erased by the above procedure.
Place +cursor on starting
point and press ENT.
Other Keys: Escape
Place cursor on end
point and press ENT.
Other Keys: Escape