Furuno GD-280, Operator'S Manual

Page: 150 / 280

7-14
4. Select recording method: New or Continue. New to overwrite past data to start recording
afresh or replace floppy disk; Continue to add data to existing data.
5. Set recording interval (time or distance) from the Interval field. Enter time or distance in four
digits and press the [ENT] key. For 30 minutes, for example, press [0], [0], [3], [0], [ENT].
6. To stop recording press [4].
7. Press the [ENT] key.
8. Press the [MENU] key several times to close the menu.
7.8.2 Replaying logger data
1. Insert floppy disk in proper drive.
2. Press [MENU], [6], [8], [2] to display the Replay menu.
3. Enter point in percentage where you want to start replaying and press the [ENT] key. For
example, if you want to replay data from the 20% point, press [2], [0], [ENT].
0% 50% 100%
Starting
position
Entire logger
data file
4. The screen displays "REPLAYING LOG". The larger the amount of data the longer the time
required to replay.
5. To temporarily stop replaying, press the [3] key.
6. Press the [ENT] key.
7. To completely stop replaying, press [4], [ENT].
8. Press the [MENU] key several times to close the menu.
Replay

Replay Starting Pos. 0 0%

↑↓←→
: Sel, Fix ENT: Execute
MENU : Esc