Furuno GD-280, Operator'S Manual

Page: 270 / 280

A-12
Message Meaning Remedy
Please specify type of data. No data specified when
attempting to replay data. Specify data to replay.
Please specify type of data. No data specified when
attempting to copy data. Specify data to copy.
Recording interrupted due to
memory full. When recording logger data,
floppy disk used is full. Replace floppy disk.
Recording … Appears when any logger
operation is attempted during
logger recording.
Replaying … Appears when any logger
operation is attempted during
logger replaying.
Route is not registered. Wrong route number entered. Enter correct route number.
Select data type to delete. No data selected when
attempting to delete a file. Select file and try again.
Source medium has been
replaced. Source medium removed during
copying. Replace source medium and try
again.
Specified target number is not in
use. You attempted to change color of
an ARP plot symbol but entered
an invalid ARP target number. Reenter correct number.
Sub Track Navaid data is not
received. Displayed when attempting to
apply automatic position offset to
sub track on a memory card file
and there is no position data. Check navigator.
Target medium changed, cannot
copy data. Target medium removed during
copying. Replace target medium and try
again.
The function key is not registered. Operated function key has not
been programmed. Program the function key.
The job has not been done. Appears when logger
suspension, restart or completion
is attempted when logger
operation has been completed.
Waypoint is not registered. Appears when you attempt to use
and unregistered waypoint when
entering a route, calculating
range and bearing and setting
destination. Use registered waypoint.
You cannot change WPT page
during route navigation. WPT page cannot be changed
when navigating a route.