Furuno GD-280, Operator'S Manual

Page: 114 / 280

5-10
5.2 Editing Waypoints
5.2.1 Viewing the waypoint list
The waypoint list displays latitude and longitude position and comment for all waypoints entered.
You can display it by pressing the [WPT ENTRY] key.
5.2.2 Changing waypoint color of specific waypoint
This feature is not available when the waypoint entry method is “Cursor.”
1. Press the [WPT ENTRY] key to display the waypoint list.
2. Press
[↑]
or
[↓]
to select waypoint.
3. Press the [ENT] key.
4. Press
[↑]
or
[↓]
to select Color.
5. Press
[←]
or
[→]
to select color desired.
6. Press the [ENT] key.
7. Press the [WPT ENTRY] key to close the waypoint list.
5.2.3 Changing waypoint number
The waypoint number of registered waypoints can be freely changed. This feature is not
available when the waypoint entry method is “Cursor.”
1. Press the [WPT ENTRY] key to display the waypoint list.
2. Press
[↑]
or
[↓]
to select waypoint.
3. Press the [ENT] key.
4. Press
[↑]
or
[↓]
to select Number.
5. Enter new waypoint number.
6. Press the [ENT] key.
7. Press the [WPT ENTRY] key to close the waypoint list.
Note: If the waypoint number entered at step 5 is already used, the following message appears.
In this case, you may overwrite the waypoint number by pressing the [ENT] key, or press any key
to escape.
New WPT number is used.
ENT : Entry
Other Keys : Escape