Furuno GD-280, Operator'S Manual

Page: 32 / 280

1-14
Setting destination by +cursor
1. Press to turn on the +cursor. Select destination with the cursor.
2. Press the [GOTO SEL] key.
3. Press [9], [8], [ENT] in order. (Waypoint 98 is special waypoint for setting destination by the
+cursor.) Waypoint position is temporarily registered as a waypoint and set as destination.
To cancel destination, press the [GOTO CANCEL] key.
1.1.17 Information display
The data (date, position, comment) of marks, lines, etc. can be shown on the display as follows:
1. Use the trackball to place the +cursor on the item of which you want to know data.
2. Press the [INFO DISP] key.
Data is displayed about 10 seconds. To erase the display immediately, press any key.
Mark GREEN
1999/04/10 05:37'14"
Lat. 34 41.512'N
Long. 135 19.846'E
Comment
Some FURUNO and NAVIONICS chart cards contain navigation information about lighthouses
and buoys. You can display information about them by selecting them with the cursor and
pressing the [INFO DISP] key. Below is an example of lighthouse information.
FL 5S 13M